陶瓷基复合装甲防12.7mm穿甲燃烧弹的靶试研究（Ⅰ）

基于对材料特性和防弹机理的认识,设计了由Al2O3陶瓷、616装甲钢和高强PE材料构成的陶瓷基复合装甲板,并用现役127.mm穿甲燃烧弹进行靶试考核,检验靶板设计思路,结果表明：防护面密度为128 kg/m2的靶板可防住该弹。     

雷电流数学模型分析

雷电流模型是自然雷电流的数学表达。通过雷电流数学模型可以得到建筑物防雷研究所关心的参量,它是建筑物雷电防护的基础。雷电流频谱分析对确定适合的雷电防护措施,消除或减弱雷电对建筑物弱电系统的破坏作用具有重要意义。选取双指数函数模型和霍德勒函数模型进行对比仿真分析和频谱分析,研究结果表明:霍德勒函数模型与BERGER等人的观测测量结果是一致的;雷电流所含频率丰富,且集中在低频部分。     

R-C系统中由表面散射引起的视场内杂散光分布

推导了R-C系统焦平面上由主镜和次镜表面散射引起的视场内杂散光分布的近似解析表达式.针对典型R-C系统的视场内杂散光分布,由近似表达式得到的计算结果与利用商业光学仿真软件得到的模拟结果具有较好的一致性,说明了近似表达式的正确性.与焦平面上无像差衍射光分布相比较,可以方便地分析强光入射时R-C系统焦平面上不同区域的饱和机制.研究结果表明,对于典型的R-C系统,探测器表面上以几何像点为中心,半径为2.5mm的范围内,衍射光是引起探测器饱和的主要因素;在此范围外,表面散射造成探测器的饱和.该结果为进一步研究强光饱和实验,解释有关现象提供理论分析基础.     

Weapon effectiveness and the shapes of damage functions

This paper provides a review of methods of assessing a fragmentation weapon's effectiveness against a point target or an area target with keeping the focus on the necessity of using the Carleton damage function with the correct shape factor.First,cookie-cutter damage functions are redefined to preserve the shape factor of and to have the same lethal area as the corresponding Carleton damage function.Then,closed-form solutions of the effectiveness methods are obtained by using those cookie-cutter damage functions and the Carleton damage function.Finally,the closed-form solutions are applied to calculate the probability of damaging a point target and the expected fractional damage to an area target for several attack scenarios by using cookie-cutter damage functions and the Carleton damage functions with different shape factors.The comparison of the calculation results shows that using cookie-cutter damage functions or the Carleton damage function with a wrong shape factor results in quite signifi-cant differences from using the original Carleton damage function with a correct shape factor when weapon's delivery error deviations are less than or comparable to the lengths of the lethal area and the aim point is far from a target.The effectiveness methods improved in this paper will be useful for mission planning utilizing the precision-guided munitions in circumstances where the collateral damage should be reduced.     

比例规则后件的T-S模糊模型辨识方法

模糊划分应满足测量准则,这一点常被忽略。采用余弦平方函数作为隶属函数,解决了曲线型隶属函数在模糊化分后满足测量准则问题。T-S模糊模型后件由线性函数构成,以局部线性化方式实现全局非线性,通过分段性逼近辨识曲线,常用于系统辨识中,但其辨识参数多是其主要问题。比例规则后件的T-S模糊系统具有万能逼近特性,且构成参数少,用于非线性系统的辨识中,可以减少辨识参数,提高辨识速度。给出其在系统辨识中应用的方法,并通过仿真实例说明本方法的有效性。     

科学制定发展规划 彰显地方高校职能

地方高校制定发展规划是适应国内外高等教育发展的客观需求，是区域经济社会发展的必要需求，是高校自身发展的迫切需求。地方高校要履行高校职能，更好地为地方经济社会发展服务就必须科学制定规划，特别是要战略规划学校的办学定位、特色和目标。同时，规划的实施要强调监控并要与高校职能协调统一。     

Bivariate models from univariate life distributions: A characterization cum modeling approach

Bivariate life distribution models are of importance for studying interdependent components. We present a generic approach by introducing a new concept of characterized model in stead of a characterized distribution. It strikes a balance between characterization and modeling approaches to eliminate their individual limitations and incorporate their respective strengths. The proposed model, being a characterized one, admits many important properties irrespective of the choice of marginal distributions. The retention of univariate IFR, DFR, IFRA, DFRA, NBU, and NWU class properties in the bivariate setup has been ensured along with some results on series combinations and convolution. No other models, available in the literature, can ensure simultaneous retention of these fundamental and extremely important class properties. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

A general approach to the shape of failure rate and MRL functions

Failure rate and mean residual life are two important characteristics for studying reliability of products. In literature, some work studied the shape of failure rate function based on the knowledge of the associated probability density function; some other work investigated the shape of mean residual life function based on the shape of the associated failure rate function separately for continuous case and discrete case. In this article, a general approach is developed which can be applied to the aforementioned studies. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

Warranty costs: An age‐dependent failure/repair model

An age‐dependent repair model is proposed. The notion of the “calendar age” of the product and the degree of repair are used to define the virtual age of the product. The virtual failure rate function and the virtual hazard function related to the lifetime of the product are discussed. Under a nonhomogeneous Poisson process scenario the expected warranty costs for repairable products associated with linear pro‐rata, nonrenewing free replacement and renewing free replacement warranties are evaluated. Illustration of the results is given by numerical and graphical examples. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004.     

Limiting survival functions of self‐similar structures

We show the existence of a unique analytic single parameter limiting survival function arising from the repeated composition of a coherent structure as the number of components tends to infinity. Examples include the repeated composition process of the bridge structure. © 2003 Wiley Periodicals, Inc. Naval Research Logistics, 2004.